6
English
itself off. To do so, launch the Parrot Zik application and select
>Settings >
Auto switch off
. This option is deactivated by default.
For the Parrot Zik3 to switch off automatically, you must not be charging or
using them. Make sure that the sensor located on the right hand speaker does
not touch anything.
WEARING THE PARROT ZIK3
Carefully adjust the headband so the Parrot Zik3 fit comfortably over your ears.
Put the headphones on using the letters (L) and (R) to help you distinguish left
and right, this is printed inside the headband.
The touch sensitive panel is located on the right earcup.
BLUETOOTH
®
CONNECTION
Before the Parrot Zik3 can be used with your smartphone or Bluetooth
®
audio
player, the two devices must be paired. Once the two devices have detected
each other it is no longer necessary to pair each time.
1. From your smartphone or Bluetooth
®
audio player, start a search for Blue-
tooth
®
peripherals.
2. Select “
Parrot Zik3”.
3. Enter “
0000” on your smartphone or Bluetooth
®
audio player if asked to
do so. Depending on your model of smartphone it is possible that a PIN
code will not be required.
Once your smartphone is paired with the Parrot Zik3 the two devices will
connect to each other automatically each time that the Parrot Zik3 is switched
To Next Page
Loading...
Need help?
General
