03
1.Swipe Down to access quick settings.
Turn on/off call audio
Menu type Do not disturb
Basic Operation
3)Need to enter the app to pair the watch, cannot con-
nect to the Bluetooth in the phone settings.
4)When the Bluetooth is successfully connected, the
main interface pulls down and the sign in the upper
left corner is on, if there is no connection, the sign in
the upper left corner is a gray state.
5)Click the third small icon “Device” at the bottom of the
page - Click “More settings” - Click “Device language” to
set the language of the watch.
Note:
Turn on call audio, in the upper left corner is on,
can answer and dial calls.
If in the upper left corner is a gray state,
1 )Click to turn off call audio, then turn it on again, and
check on.
ʥʜˁ˘˘˗˧ˢЁˡ˗Ϡˆ˘˧˧˜ˡ˚˦ϡˢˡ˧˛˘ˠˢ˕˜˟˘ˣ˛ˢˡ˘ʠʶ˟˜˖˞
“Bluetooth” - Find the Bluetooth name of the watch
“Parsonver FF1” - Click to connect
Mute mode
Raise to wake
Flashlight
Settings
Scan to connect to
the watch or down-
load the APP
Brightness
adjustment
Find phone
Note:
Need to turn off the
media audio of the watch.
To Next Page
Loading...