Need help?Do you have a question about the Partner 1750 and is the answer not in the manual?
Instructions for starting the chain saw operation.
Instructions for stopping the chain saw operation.
Fundamental guidelines for preventing kickback.
Procedure for checking the kickback guard for defects.
How to manually test the chain brake's functionality.
How to test the inertia-activated chain brake.
Details on the type and use of chain oil.
Instructions for refilling the chain oil reservoir.
Procedure to verify the automatic oiling system is working.
How to inspect the chain for wear and damage.
Basic advice on keeping saw cutters sharp for optimal performance.
Step-by-step guide to sharpening the chain cutters.
Definition and safety precautions for the tree felling danger zone.
Factors influencing and considerations for felling direction.
Preparing the work area and planning escape routes.
Overview of the three-cut method for felling trees.
Detailed instructions for making the tree felling notch.
To Next Page
General
