EasyManua.ls Logo

Partner P6553D User Manual

Partner P6553D
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P6553D
Manuel d’instructions
Lisez très attentivement et soyez
certain de comprende ces in struc -
tions avant d’utiliser cette machine.
Manual de las
instrucciones
Por favor lea cuidadosamente y
comprenda estas intrucciones antes
de usar esta maquina.
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them
before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Instructieboekje
Lees deze instructies aandachtig
en zorg dat u ze begrijpt voordat
u deze machine gebruikt.
Manuale di istruzioni
Prima di utilizzare la macchina
leggete queste istruzioni con at-
tenzione ed accertatevi di averle
comprese bene.
Question and Answer IconNeed help?

Do you have a question about the Partner P6553D and is the answer not in the manual?

Partner P6553D Specifications

General IconGeneral
BrandPartner
ModelP6553D
CategoryLawn Mower
LanguageEnglish

Summary

Getting Started: Instruction Manual

Understanding Operating Instructions

Carefully read and understand all instructions before using this machine.

Operator Training and Preparation

User Familiarization and Controls

Read instructions, understand controls, and ensure user familiarity before operation.

Pre-Mowing Preparation

Inspect area, handle fuel safely, and check machine components before use.

Safe Mowing Operation

Guidelines for mowing on slopes, in daylight, avoiding wet grass, and safe engine operation.

Machine Maintenance and Storage

Proper procedures for keeping the machine in safe working condition and storage.

Machine Safety Symbols and Specifications

Interpreting Safety Symbols

Learn the meaning of various symbols found on the machine and its literature.

Critical Operational Safety Warnings

Important safety alerts regarding hot surfaces, thrown objects, and safe operation.

Machine Performance Specifications

Information on power, speed, dimensions, weight, and noise levels.

Handle Installation

Securing the Handle Assembly

Pull up the handle in the arrow's direction and tighten wing-nuts.

Rear Foot Guard Installation

Installing and Securing Rear Foot Guard

Position the guard as shown and secure with supplied fasteners for safe operation.

Grass Catcher Installation

Assembling and Attaching Grass Catcher

Insert frame into bag, slip bindings, and secure catcher to mower housing.

Grass Catcher Management

Emptying and Cleaning Grass Catcher

Release engine brake, lift rear door, and remove catcher by handle. Avoid dragging.

Mower Mode Conversion

Configuring Mowing Modes

Instructions for rear bagging, mulching, or side discharging.

Adjusting Cutting Height

Setting Lawn Mower Cutting Height

Adjust lever at each wheel to set cutting level. Ensure all wheels are at the same height.

Engine Oil Refilling

Refilling Engine Oil

Fill the engine with SAE30 oil, reading enclosed motor instructions.

Engine Start and Stop Procedures

Safe Engine Starting and Stopping

Instructions for starting a cold engine, stopping, and notes on priming.

Drive System and Speed Control

Engaging Drive and Adjusting Speed

Engage drive with clutch bar, select speed with gear shift lever.

Safe Mowing on Slopes

Operating on Slopes Safely

Do not use on slopes exceeding 15° to prevent engine lubrication problems.

Mowing Frequency and Maintenance

Optimal Mowing Frequency and Techniques

Mow twice weekly, never cut more than 1/3 length, use high setting first.

Maintenance Safety Procedures

Safety Checks Before Maintenance

Always remove spark plug lead before maintenance. Tighten screws and check oil.

Routine Maintenance Checks

Checking Engine Oil Level Regularly

Stop engine, unscrew dipstick, check level between FULL and ADD. Ensure dipstick is fully screwed.

End-of-Season Maintenance

Annual Blade Servicing

Grind and balance the cutter blade. Use protective gloves. Deliver blade to service workshop.

Periodic Maintenance and Adjustments

Engine Oil and Air Filter Care

Procedures for changing engine oil and cleaning the air filter cartridge.

Adjusting Drive Cable Tension

Rotate thumbscrew to tighten or loosen drive cable for ground speed adjustment.

Transport and General Information

Safe Transport Procedures

Remove spark plug lead, empty fuel tank before public transport.

Related product manuals