To Next PageTo Next Page
Need help?Do you have a question about the Partner psb27 and is the answer not in the manual?
Read manual, learn controls, stop unit, disengage controls.
Inspect area, remove objects, disengage clutches, wear winter clothing, handle fuel safely.
Keep hands/feet clear of moving parts, exercise caution on surfaces, handle strikes, check vibration.
General safety warnings such as Danger, Caution, and specific operational hazards.
Symbols and labels for engine starting, choke, primer, fuel, oil, and traction drive controls.
Controls for steering, forward/reverse movement, and snow discharge direction/deflector.
Locate and use the provided tool box for assembly parts.
Instructions to unfold the upper handle and secure it with knobs and bolts.
Steps to install the speed control rod to the handle assembly.
Procedures for stopping the traction drive, auger, and engine safely.
Instructions on how to use the choke control for starting a cold engine.
How to use controls for chute direction and snow throw distance.
How to use controls for self-propelling, speed, and direction.
How to use the clean-out tool to clear blockages safely.
How to adjust skid plates for proper ground clearance and surface conditions.
Details about the scraper bar, its function, and replacement.
Procedures for checking and filling the engine oil level.
Instructions for safely adding gasoline to the fuel tank.
Detailed steps for cold and warm starts using both starter types.
Advice on speed, timing, overlap, wind direction, and engine maintenance.
Warning about operating in low visibility conditions that impair safety.
Checklist for routine checks like oil, fasteners, tire pressure, lubrication, belts, muffler, and spark plug.
Procedures for checking and changing engine oil, including intervals and safety.
Inspecting and replacing the muffler and spark plug.
How to clean the snow thrower after use, including warnings about water.
Essential safety steps before performing any service or adjustments.
Securing the augers with shear bolts and their purpose.
Securing the impeller with shear bolts and their purpose.
Steps to remove the belt cover for access to belts.
Detailed procedure for replacing worn or damaged drive belts.
How to adjust the tension on control cables for proper operation.
Procedure for adjusting traction and auger belt tension.
Information about the non-adjustable carburetor and its performance at altitude.
Warning about tampering with the engine governor and seeking professional adjustment.
General steps to clean and prepare the unit for long-term storage.
Procedures for draining fuel, changing oil, and preparing the cylinder.
Common causes and corrections for an engine that won't start.
Causes and corrections for reduced engine power or rough running.
Identifying and resolving excessive vibration problems.
Troubleshooting a hard-to-pull recoil starter.
Causes and corrections for loss of traction or drive speed.
Identifying and resolving issues with reduced or no snow discharge.
General| Brand | Partner |
|---|---|
| Model | psb27 |
| Category | Snow Blower |
| Language | English |
