Instruction Manual
012-10860C
Angle Indicator
ME-9495A
800-772-8700 www.pasco.com
Introduction
The PASCO ME-9495A Angle Indicator is an accessory
used for measuring angles from 0° to 90° in two directions.
There are four different methods of using the Angle Indica-
tor:
• hand-held, by suspending the device over a string.
.
• attached to a PASCO Cart by sliding the device into
the slots on the top of the cart.
• attached to the side of a PASCO Track.
To Next Page
Need help?
General
