Paser Unicanplus CF0007UNUN11 User Manual

Pag 4
THIS PRODUCT IS COVERED BY TWO-YEAR GUARANTEE FOR ANY
MANUFACTURING TROUBLES. THE WARRANTY IS VALID IF
ACCOMPAINED BY THE INVOICE OF PURCHASE
WARRANTY
The information in this guide are purely for information purposes, therefore, are subject to change without notice.
At the time of publication the information is correct and reliable.
However Paser can not be held responsible for any consequences resulting from errors or omissions in this ma-
nual. Paser reserves the right to improve / change the product or manual without obligation to notify users.
INSTALLATION MANUAL
UNICANPLUS
UNIVERSAL CANBUS Adapter
for steering wheel commands
and Autoradios
with wired Remote input rev. 21
DESCRIPTION
UNICANPLUS is a UNIVERSAL adapter for steering wheel commands with CANBUS protocol, the
principal characteristics being its compatibility which extends to a large number of vehicles, listed in
table 1, and to the CLARION - KENWOOD - JVC - ALPINE - PIONEER - SONY autoradios which
have a wired input on the back of the autoradio for control of the remote.
The module not only handles the steering wheel commands but supplies services such as ignition,
slidelights, reverse gear and odometric signals where present on the CANBUS.
The selection of the protocol comes through SELF-RECOGNITION, which means that when the
connections for the insertion of the module to the connector have been completed, the unit will un-
dergo, within about a second, the synchronization and the selection of the right CANBUS protocol of
the auto on which the module is being installed.
Pag 1
CABLE FUNCTION
RED POSITIVE POWER SUPPLY
BLACK NEGATIVE POWER SUPPLY
GREEN HIGH CAN
WHITE LOW CAN / K-BUS
PINK POSITIVE IGNITION OUTPUT
ORANGE POSITIVE SIDELIGHTS OUTPUT
GREY ODOMETRIC SIGNAL
BLUE POSITIVE REVERSE GEAR OUTPUT
YELLOW/WHITE NEGATIVE HANDBRAKE OUPUT
CABLING DESCRIPTION

Paser Unicanplus CF0007UNUN11 Specifications

General

Brand	Paser
Model	Unicanplus CF0007UNUN11
Category	Adapter
Language	English

Summary

Unicanplus Adapter Overview

Product Description and Features

Details the UNICANPLUS adapter's compatibility with vehicles and autoradios, and its self-recognition capability for steering wheel commands.

Cabling Functions

Lists the functions for each colored cable used to connect the UNICANPLUS adapter to the vehicle and autoradio.

Installation and Configuration Procedures

Self-Recognition and Autoradio Selection

Explains the automatic protocol synchronization and the process for selecting the correct autoradio using the module's LED.

Jumper Settings for Radio and Output

Describes the functions of jumpers J1-J5 for specific radio models and output signals like brake and reverse gear.

Module Reset Procedure

Instructions on how to reset the UNICANPLUS module, necessary when installing it in a new car model.

Troubleshooting and Technical Specifications

Troubleshooting Common Issues

Provides solutions for common problems such as the unit not working, LED status issues, and synchronization failures.

Technical Characteristics

Lists the technical specifications including power supply voltage and current absorption during rest and operation.