r
~t:.H V ILlt ~~leOI ra ~UUU A ~
ANLEITUNG INSTRUCTION INSTRUCTION INSTRUCCION z..
IMPORTANT:
I. The electra 3000A (as from serial-no. 109201) can no more be fitted to: '
-DUOMATIC pink and blue :;
-DUOMATIC -80, serial no. 3'000'001 -3'005'000 and 199001 -199100
II. The electra 3000A (as from serial-no. 109201) can be fitted to: "
-.,
-DUOMATIC -80, as from serial-no. 3'005'001
-All DUO 80 single bed rebuilt into double bed (pay attention to serial-no.
-DUOMATIC -S, all variants on needle bed~)
-TRICOMAT -32, all variants
III. The electra 3000A can ~ be~fitted if there is already or will be
h a COLOR or a SPECIAL two-colour changer on the knitting machine!
~ without the COLOR or SPECIAL two-colour changer, the locks could fall ('
01{ on the floor on the right-hand side of the knitting machine!'
~ '
IV. If you intend to fit the electra 3000 (up to serial-no. 109200) according
to these instructions also in the new fastening method, a special fastening'
kit may be ordered for it: Art.no. 12.992.00 fastening kit E-3000.
Please note that points I-III above do also apply in this case.
...'.
f
"
j 'co
.-,j :
1. General information on fitting the electra 3000A'.
-:
-Open the box (packing) and check that the voltage indicated on thJ covering.
plate of the electra is exactly the same as the voltage in your home. If this
.is not the case, do not use the electra! :
J
-The box (packing) contains the following items: "', 1
.I 1 electra 3000A ~.
1 Foot controller art.no. 12.830.03 for E-3000/E-3000A !
or
I fuot controller art.no. 12.857.03 for E-3000/E-3000A for USA/CDN .:
or ;
Foot controller art.no. 12.970.03 for E-3000/E-3000A for Australia :.J
;
1 Operating instructions for E~3000/E-3000A '
1 Plastic bag (large) art.no. 12.510.~, containing:
; 1 Plastic bag art. no. 12.511.11 VM-Connecting parts for RT-63/RT-80/DM
-
1 Plastic bag art.no. 12.512.01 VM-Fastening parts necessary only for
1 Driver "for cam box art.no. 12.514.12 ~
r 2 Angular bracket compl. " " 12.535..);2 ~
'--- ,I
1 Ratchet lever compl. " " 12.559.03 (for FORMA) ;
!
1 Control bar compl."" 12.607.02
1 Racking plate compl. " " 12.985.01 '~
1 Assembling cardboard II " 12.993.02
To Next Page
Loading...