pastoe LANDSCAPE - Assembly Instructions (Wall Mounted); Base and Open Compartment Assembly; Body and Top Securing

Secure the finishing top from the bodies underneath using the supplied short bolts (B; L=20mm).
NOTE! Be sure to use the short bolts for this. The long bolts could damage the top.
6
B
B B
B B B
BB
B B
BB
B
B
B
B
Place the open compartment over the back panel by sliding it
over the connecting bolt.
3 OPEN COMPARTMENT2 OPEN COMPARTMENT
Place the following body. Tighten the minifixes.
4 OPEN COMPARTMENT
Secure the base from the bottom using the supplied bolts (B;
L=20mm).
5
B B
BB
D
D
F
F
F
Secure the base from the bottom using the supplied bolts (B; L=20mm).
NOTE: The cabinet must be assembled so it can be mounted on the wall. The cabinet is to be mounted on the wall as a whole. To do so, please
follow the steps below.
To mount cabinets starting at 2.85m on the wall, three people will be required.
1
B
B B
B
B
B
B
B
F
If this cabinet does not feature an open compartment, please go on
to step 5.
Place the back panel using the lamellos(E).
Assembly instructions