PAT IK350/1272 User Manual

© 1996-2001 by PAT GmbH ∙ D-76275 Ettlingen ∙ Hertzstr. 32 - 34 ∙  ++49 (0) 7243 709-0 ∙ FAX ++49 (0) 7243 709-141 1
19_1272E.DOC / 2001-04-02 / Rev. C / ko.
The information in this document is subject to change without notice. PAT makes no warranty of any kind with
regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a
particular purpose. PAT shall not be liable for errors contained herein or for identical or consequential damages
in connection with the furnishing, performance, or use of this manual. This document contains proprietary infor-
mation which is protected by copyright. All rights reserved. No part of this document may be photocopied, re-
produced, or translated to another language without the prior written consent of PAT.
USER MANUAL
IK 350 / 1272
part no. 50 350 19 1272 e

PAT IK350/1272 Specifications

General

Brand	PAT
Model	IK350/1272
Category	Touch Panel
Language	English

Summary

General Information

Safety Warnings and Precautions

System Description

System Functionality

Explains the system's automatic test, ready state, and handling of error codes.

Operator Console

Details the operator's console functions for input and displaying important data.

Control Identification

Illustrates and lists the controls and displays of the DS 350 safe load indicator.

Data Display and Indicators

Details the main LC display and the Anti-Two Block indicator.

Warning Lights and Status

Describes load moment prewarning, limit lights, and override key warning indicators.

Operational Buttons

Covers key buttons like 'Operating Mode', 'Reeving', 'Taring', and 'Buzzer Off'.

Input and Confirmation Keys

Details the numerical keypad and confirmation keys like 'C' and 'asterisk'.

Detailed Data Display Elements

Explains various data displays including load, geometrical, and error code readouts.

System Programming and Configuration

Operating Mode Programming

Explains how to adjust the LMI to the crane's rigging condition using the operating code.

Reeving Adjustment

Details the procedure for inputting the present reeving of the hook block.

Pre-Operation Inspection and Calibration

System Operation and Verification

Covers LMI operational checks after inspection and verification by lifting a known load.

Service and Maintenance

Troubleshooting Guide

System Messages

Lists code letters representing system messages like Overload, Prewarning, and Anti-two Block.

Error Code Table

Provides a table of error codes with descriptions, causes, and remedies for fault diagnosis.

Important Notes for Crane Operators

Important Notes for Crane Users

Electromagnetic Compatibility (EMC) Instructions

Display and Console Handling Notes