Quick Start Guide
Installing the Unit
Guidance Screen
Mount to the windscreen
using suction mount and
arm.
Warning – Please disconnect the unit from the power
supply, if you need to jump start your vehicle.
PWdoc0007 rev.2.3
12v DC Plug
Plug into 3 pin
socket on vehicle.
Magnetic Antenna
Install centrally across the
width of the roof (if the roof
is not metal use the roof
mount plate supplied).
Warranty Void if suction mount fails !! - Its is advised that the suction mount
is removed from the windscreen when the unit is not in operation and
reattached on a day to day basis.
For a more permanent fixing, a mounting kit that can be secured to the vehicle is
available for an additional cost.
Touch Screen
USB Power Socket
Charge the screen via supplied USB Cable.
It is recommended that the charge cable is always connected to
the screen whilst in use.
To Next Page
Need help?
General