To Next PageTo Next PageWhy won't my patio F210017-B2 burner ignite?
There are several reasons why the burner on your patio Gas Heater might not ignite: * The gas cylinder may be frosted over. If this is the case, wait until the gas cylinder warms up and becomes unfrosted. * An opening might be blocked. Check for and clear any blockages. * The control knob might not be in the “ON” position. Ensure the control knob is turned to the “ON” position.
What to do if my patio Gas Heater burner flame is too low?
If the burner flame on your patio Gas Heater is too low: * The gas pressure might be low. Turn the cylinder valve off and replace the cylinder. * If the outdoor temperature is less than 40°F and the cylinder is less than 1/4 full, use a full gas cylinder. * Also, check the burner ports for any blockage.
Consequences of non-compliance with safety instructions.
Risks of carbon monoxide poisoning and ventilation requirements.
Risks of fire and explosion from combustibles and ignition sources.
Propane storage, heat hazards, and keeping flammables away.
General| Brand | patio |
|---|---|
| Model | F210017-B2 |
| Category | Gas Heater |
| Language | English |
