a. Connect C and A or B using supporting part R and bolts X
to build the four poles (2 x C & A and 2 x C & B).
Do not fully tighten the bolts when you insert C into A or B.
b. Connect part T and four poles using bolts X.
Fully tighten bolts X after C connected with A or B vertically.
a. Connect D, E and F using supporting part Q and bolts X to
build main beam 1.
b. Connect G , H and I using supporting part Q and bolts X to
build main beam 2.
Step2.
Allen wrench
Page 4
A 2X
B
2X
C
4X
R
8X
X
M6X15
72X
Allen wrench
Step1:
To Next Page
Loading...