To Next PageTo Next PageWhy does the motor of my Patriot VK0800 overheat?
If the motor of your Patriot Rotary Hammer overheats, it may be due to overload from applying too much pressure while drilling. To resolve this, let the motor cool down by running the tool idle at maximum speed for about 3 minutes.
How to reduce strong vibrations in Patriot VK0800 Rotary Hammer?
Excessive vibrations in your Patriot Rotary Hammer can often be traced to an incorrectly mounted drill or tool. Check the drill or tool and ensure it is correctly mounted.
General| Power | 800 W |
|---|---|
| No-load Speed | 0-1100 RPM |
| Chuck Type | SDS-Plus |
| Weight | 2.8 kg |
| Voltage | 220-240 V |
| Amperage | 3.6 A |
| Drilling Capacity (Concrete) | 26 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Power Source | Corded |
Lists and identifies key parts of the rotary hammer.
Explains the meaning of various safety warning symbols used in the manual.
Covers work area, electrical, and personal safety for power tool use.
Guidelines for maintaining a safe and clean work environment.
Precautions regarding power cords, grounding, and wet conditions.
Advice on staying alert, using PPE, and proper handling.
Instructions on tool usage, maintenance, and storage.
Guidance on professional servicing and replacement parts.
Specific safety precautions for rotary hammers.
How to attach and adjust the auxiliary handle for better control.
Instructions for setting and using the depth stop for drilling accuracy.
Procedures for inserting SDS tools, using the geared-rim chuck, and clamping cylindrical bits.
Recommended PPE for operating the rotary hammer safely.
How to switch the tool on/off, engage continuous run, and adjust speed.
How to change the rotation direction for drilling and screwing.
How to select different operating modes like drilling, impact drilling, and chiseling.
Tips for effective and safe operation with different materials and tasks.
General notes on keeping the tool clean and serviced.
Instructions for cleaning the power tool after use.
Guidelines for storing the tool safely when not in use.
Information on noise and vibration emission levels during operation.
