Need help?Do you have a question about the PATROLLINE HPS 845 E (H) and is the answer not in the manual?
Details the signals confirming the vehicle alarm has been armed.
Details the signals confirming the vehicle alarm has been disarmed.
Explains the 10-second arming period and sensor testing phase.
Details the panic function and its activation requirements.
How to exclude specific sensors to prevent false alarm triggers.
Procedure to exclude the default shock sensor using a specific remote.
Describes the use of optional PATROLLINE wireless opening sensors for buildings or campers.
Procedure for disabling the siren/horn using the default vehicle remote.
Procedure for disabling the siren/horn using the PATROLLINE remote.
Procedure for disarming the alarm using the ignition key and PIN.
Procedure for disarming the alarm using the brake/handbrake and PIN.
Automatic disarming via ignition key ON and transponder identification.
Instructions for changing the default PIN code to a personalized one.
How to activate and deactivate the Valet function using the anti hi-jack button.
How to activate and deactivate the Valet function using the ignition key.
How to activate and deactivate the Valet function using the brake/handbrake.
General| Power supply | 12V DC |
|---|---|
| Immobilizer | Yes |
| Anti-hijack | Yes |
| Type | Car Alarm |
| Current Consumption (Standby) | 20 mA |
| Inputs | 4 programmable inputs |
To Next Page
