Patterson Medical Midland 4512E User Manual

MODEL 4512E & 4512EC:
Midland ®
Stand-In Table
Operation and Service Guide
Midland ® by
Sammons Preston
4 Sammons Court
Bolingbrook, IL 60440-4989
(630) 226-1300
TABLE
OF CONTENTS
•
Purpose of Stand-In Table

Page 1
•
Setup 
Pagel
• Method of Operation

Page 2
•
Cleaning 
Page 2
•
Preventative Maintenance

Page 2
•
Trouble Shooting Guide

Page 3
•
Warranty 
Page 3
•
Service 
Page 3
•
Technical Specifications and Replacement Parts

Page 4
PURPOSE OF HI-LO TREATMENT TABLE
The purpose of the Stand-In Table is to assist in moving the patient from a sitting position in
a wheelchair to a standing position.
SET UP
Uncrate the table and check to ensure that all parts listed are included in your shipment.
Inspect the power cord, plug, controls, frame and upholstery for damage.
Model 4512E is completely assembled and ready to use. If any part is missing (see
illustration drawings and parts list on page 5) or damaged, please call customer service at
Sammons Preston at
1-800-323-5547.
Set up the table in a location that allows ample clearance around, above, and below the table,
and has access to the needed power supply. Securely lock all four casters for stability. The
unit is shipped with a 3-pole male hospital grade 15 amp plug (110V models). To maintain
adequate grounding, the unit must be plugged into a 3-pole receptacle (110V models)
(preferably a hospital grade) that is correctly wired to the building power system. 3 pole
male plugs are provided for 220V models due to the variation of receptacles. Illustration A
shows the correct color connections of a hospital grade cord to a 3 pole plug (220V models).
1

Patterson Medical Midland 4512E Specifications

General

Channels	Dual
Intensity Levels	Adjustable
Pulse Rate	Adjustable
Pulse Width	50-300 μs
Type	TENS Unit

Summary

Stand-In Table Setup

Operation and Maintenance

Method of Operation

Instructions for safely operating the stand-in table to move patients from sitting to standing positions.

Cleaning Procedures

Unplug unit before cleaning. Remove infective material with approved germicidal solution and allow to dry.

Preventative Maintenance

Guidance on maintaining the table, including checking cords and noting bushing lubrication needs.

Support and Troubleshooting

Troubleshooting Guide

Steps to identify and resolve common operational issues with the stand-in table.

Warranty Information

Details the 5-year warranty against defects in material and workmanship under normal use.

Service and Contact

Contact Sammons Preston for service, providing necessary item and serial numbers.

Technical Specifications

Model 4512E Specifications

Key technical details including power requirements, leakage currents, and dimensions for the 4512E model.

Replacement Parts List

4512E Replacement Parts

4512EC Replacement Parts