SAFETY PRECAUTIONS
WARNING
Do not operate this equipment in excess of its rated speed or other than in accordance with the
instructions contained in this manual.
The equipment has been found satisfactory for the conditions for which it was sold, but its operation in
excess of these conditions may subject it to stresses and strains which it was not designed to withstand.
For equipment covered by this instruction book, it is important to observe safety precautions to protect
personnel from possible injury. Among the many considerations, personnel should be instructed to:
avoid contact with rotating parts
avoid bypassing or rendering inoperative any safeguards or protective devices
avoid extended exposure in close proximity to machinery with high noise levels
use proper care and procedures in handling, lifting, installing, operating and maintaining the
equipm
ent
do not modify this equipm
ent – consult factory if modification is deemed necessary
do not substitute for repair parts which can be provided by the equipment manufacturer.
Safe m
aintenance practices with qualifie
d personnel are imperative.
Failure to heed this warning may result in an accident causing personal injury.
INITIAL INSPECTION
Upon delivery of the pumping unit verify that all items on the bill of lading are present. Also verify that the
pump unit is not damaged. Immediately report any shortages or any damage to the Freight Company. List
the damage or shortages on the bill of lading and the freight bill.
To Next Page
Loading...