Patterson Versa II User Manual

Page 1 of 2 Rev. 3 Customer Service: 1-800-225-7911 Tech Support: 1-866-825-6076
Versa II Anesthesia System
Quick-Start Guide – Pole Mount Option
(if installing as a tabletop unit go to www.pattersonscientific.com/manuals and
download the quick-start guide for tabletop option.)
Items included:
Base and casters Universal F Circuit
Machine pole MJR Circuit
Anesthesia machine head Absorber canister (boxed)
Hardware bag (contents documented by label on bag)
Remove the base and casters from the packaging and place
on the floor.
Remove the pole from the packaging. Place the pole into the
base (tapered end into base). Tap firmly to seat pole into
base.
Remove the anesthesia machine
head from the packaging and
place the mounting “spud” into
the top of the pole.
Align the hole in the “spud” with
the hole in the top of the pole.
Insert and tighten using the pole
knob found in the hardware bag.

Patterson Versa II Specifications

General

Type	Dental Chair
Manufacturer	Patterson Dental
Model	Versa II
Delivery System	Optional delivery systems available
Lighting	LED lighting options

Summary

Pole Mount Assembly Steps

Base and Casters Setup

Remove the base and casters from packaging and place on the floor.

Pole Installation

Insert the pole into the base (tapered end) and tap firmly to seat.

Anesthesia Machine Head Mounting

Mount the anesthesia machine head by attaching the 'spud' to the pole top.

System Preparation and Checks

Absorber Canister Filling

Fill the absorber canister with CO2 absorbent and secure it to the anesthesia machine.

Flutter Disk Inspection

Check inhalation/exhalation flutter disks are correctly oriented flat on valves.

Vaporizer Installation

Install the vaporizer, using spacers if needed, and place endcaps on ports.

Leak Check Procedure

Perform a leak check on the anesthesia machine prior to use.