Pavement Ends 41730 User Manual

Canopy Cover
Installation Instructions
For: Jeep Wrangler JK (2 Door)
2007 to current
Part Number: 41730
Table of Contents
PARTS LIST ...................................................... PAGE 2
T
OOLS NEEDED ................................................. PAGE 2
I
NSTALLATION .................................................... PAGE 2
W
ARRANTY ....................................................... PAGE 4
DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE.
This product is only designed for the vehicles listed above. Failure to install this product on the proper
vehicle could cause injury to the vehicle occupants and damage to the product.

Pavement Ends 41730 Specifications

General

Brand	Pavement Ends
Model	41730
Category	Automobile Accessories
Language	English

Summary

Installation Tips

For a Smooth Fit

Advice on achieving a proper fit for the canopy cover by installing at optimal temperatures.

Installation Steps

Step One: Prepare Vehicle

Ensure vehicle engine and lights are off, set the parking brake, and remove personal possessions.

Step Two: Place Canopy Cover

Orient the cover with the Bestop label on the passenger side, fold mirrors, and drape over the vehicle.

Step Three: Secure Side Straps

Locate and hook adjustable straps to the bottom of the vehicle, ensuring fabric lies flat, then tighten.

Step Four: Secure Plastic Strips

For soft top vehicles: slip plastic strips into the belt rail retainer on the vehicle's side.

Step Five: Secure Rear of Cover

Pull and hook the two rear adjustable straps to the bottom of the tailgate and adjust tension.

Step Six: Install Cable Lock (Optional)

Thread a cable and lock through the side grommet and mirror to secure the cover.

Care and Maintenance

Washing Instructions

Wash fabric with soap, warm water, and a soft brush, then rinse thoroughly with clear water.

Water Seepage and Rips

Apply Scotchgard to seams for water seepage and use iron-on patches for fabric rips.

Limited Warranty

Warranty Coverage and Claims

Product is warranted against defects for one year; contact factory for claims, retaining proof of purchase.

Exclusions and Limitations

Excludes damage from accidents, misuse, or improper installation; implied warranties are limited.