To Next PageTo Next Page
Need help?Do you have a question about the PAW SC5.14 and is the answer not in the manual?
Detailed guidance on physically mounting the controller unit to a wall or panel.
Instructions for connecting power supply, sensors, and outputs to the SC5.14 controller.
Description of the controller's buttons and their functions for navigation and control.
How to navigate menus and adjust settings using the controller's buttons.
Setting the preferred language for the controller's user interface.
Selecting system scheme and configuring temperature, volume, pressure, and energy units.
Setting the clock, date, and selecting the solar system configuration.
Displaying the current operational status of the solar system and its components.
Details on error codes, their meanings, and potential causes for troubleshooting.
Configuration of fundamental system and variant settings for the solar circuit.
Selection and configuration of additional pre-programmed functions for the solar system.
Setting up monitoring functions for temperature differences, circulation, and store limits.
Selection and adjustment of additional functions for the general system arrangement.
Activating and adjusting heating demands for various system components.
Control of external heating circuits via EM modules, including weather compensation.
Instructions on how to begin recording system data onto the SD card.
Procedure to save current controller configuration parameters onto the SD card.
Process for registering connected external modules like displays or I/O expanders.
Selecting sensor types (KTY, Pt1000, etc.) and adjusting offsets for input channels.
Setting signal types (PWM, 0-10V) and minimum speeds for connected pumps.
Information on various temperature sensors, flow meters, and overvoltage protection devices.
Details on displays (GA3, SD3) and alarm modules (AM1) compatible with the VBus® system.
Information on USB and LAN adapters for PC connection and data transfer.
Detailed guidance on physically mounting the controller unit to a wall or panel.
Instructions for connecting power supply, sensors, and outputs to the SC5.14 controller.
Description of the controller's buttons and their functions for navigation and control.
How to navigate menus and adjust settings using the controller's buttons.
Setting the preferred language for the controller's user interface.
Selecting system scheme and configuring temperature, volume, pressure, and energy units.
Setting the clock, date, and selecting the solar system configuration.
Displaying the current operational status of the solar system and its components.
Details on error codes, their meanings, and potential causes for troubleshooting.
Configuration of fundamental system and variant settings for the solar circuit.
Selection and configuration of additional pre-programmed functions for the solar system.
Setting up monitoring functions for temperature differences, circulation, and store limits.
Selection and adjustment of additional functions for the general system arrangement.
Activating and adjusting heating demands for various system components.
Control of external heating circuits via EM modules, including weather compensation.
Instructions on how to begin recording system data onto the SD card.
Procedure to save current controller configuration parameters onto the SD card.
Process for registering connected external modules like displays or I/O expanders.
Selecting sensor types (KTY, Pt1000, etc.) and adjusting offsets for input channels.
Setting signal types (PWM, 0-10V) and minimum speeds for connected pumps.
Information on various temperature sensors, flow meters, and overvoltage protection devices.
Details on displays (GA3, SD3) and alarm modules (AM1) compatible with the VBus® system.
Information on USB and LAN adapters for PC connection and data transfer.
General| Brand | PAW |
|---|---|
| Model | SC5.14 |
| Category | Control Panel |
| Language | English |
