PawHut D00-108 - User Manual

Need help?

Do you have a question about the PawHut D00-108 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the PawHut D00-108 pet stroller, providing instructions for assembly, usage, and maintenance.

Function Description

The PawHut D00-108 is a pet stroller designed for transporting pets. It features a main compartment with a canopy, a storage basket, and a cup holder. The stroller is foldable for easy storage and transport. It is equipped with front and rear wheels, and a brake system for safety. A safety leash is included to secure the pet inside the stroller.

Important Technical Specifications

Maximum Weight Capacity: 60 lbs (approximately 27.2 kg)
Maximum Load Weight of Storage Basket: 3.3 lbs (approximately 1.5 kg)
Components:
- Handle
- Cup holder
- Canopy
- Storage basket
- Footboard
- Front wheel
- Rear wheel

Usage Features

Safety Guidelines:

For pets only.
Do not leave the pet unattended in the stroller.
Always apply the brake when the stroller is stationary.
Do not hang or place heavy items on the handle to prevent the stroller from tipping backward.
Do not use any components not supplied by the manufacturer.
Excessive load weight can lead to dangerous instability.

Assembly Instructions:

Opening the Stroller:
- Release the folding hook.
- Lift the handlebar.
- Unfold the stroller.
- Ensure both joints are locked.
Assembling the Front Wheel:
- Insert the axle of the wheel into the hole until a "CLICK" sound is heard (refer to image 2-1).
- To disassemble the front wheel: press the metal clip button with one hand and remove the wheel with the other hand (refer to image 2-2).
Assembling the Rear Wheel:
- Insert the wheel into the hole on the axle until a "click" sound is heard (refer to image 3-1).
- Insert the tube leg into the wheel connector until a "click" sound is heard (refer to image 3-2).
- To disassemble the rear wheel: press the button and remove the rear wheel (refer to image 3-1).
Attaching the Footboard:
- Attach the footboard to the bottom.
- Tighten the screws.
Attaching the Cup Holder:
- Aim at the stake on the handle tube.
- Fix the cup holder in place.
Operating the Brake:
- To stop the stroller: step the brake pole down.
- To release the brake: lift the brake pole up.
Fastening the Safety Leash:
- Fasten the safety leash with the pet collar.
Folding the Stroller:
- Unzip the canopy window first.
- Press the folding button in the direction of the arrow to fold the stroller.
- Fasten the folding hook.