More Concentrate Info
• WARNING! The adapter gets extremely hot! Let it cool down
before handling.
• For best performance, we recommend using only 10 - 20 milligrams
of material (about the size of a lentil) and setting the device to the
Med-High or High temperature settings. You may find that your
vapor is slightly richer than using loose-leaf.
• If the adapter seems to be stuck, turn on the device for 2-3
seconds until it loosens up and then remove it.
• Compared to the standard or Half Pack Oven Lid you’ll find that
the concentrate insert will sit slightly raised from the bottom of the
device to increase airflow, making it easier to remove once you’re
finished with a session. Although the neodymium magnets are
incredibly strong and should keep the insert in place inside pockets
or bags, you may wish to replace the insert with the standard oven
lid before storing.
• Avoid allowing concentrates into the two chamber tubes.
• Although the magnets are incredibly strong and should keep the
insert in place inside pockets or bags, you may wish to replace the
insert with the standard oven lid before storing.
• You may find that your vapor is slightly richer than using loose-leaf.
• The concentrate insert is a precision CNC machined aluminum oven
that works well with a variety of concentrate materials using PAX 3’s
conduction heating. Its unique design and aluminum construction
provides faster heat transfer and ensures a mess free experience
no matter how you hold your device.
• Unlike other oil pens that utilize coil heaters and have a greater
chance of overheating and regular cleaning, the PAX 3 insert,
and its algorithm controlled heating, is much gentler and doesn’t
overheat your concentrate.
• The insert does not need to be loaded or cleaned after every
use, unless you’d like to minimize mixing flavors. We recommend
cleaning the insert every 5-10 uses.
To Next Page
Loading...
