Concentrate
Quick Start
Use the adapter as an oven lid replacement
for concentrate use with PAX 3.
INSTRUCTIONS:
1. Ensure the PAX 3 oven is material-free before using insert.
2. Place small amount - “lentil” sized material of concentrate into
chamber (10 - 20 milligrams of material for best performance.
3. Replace chamber lid. Insert end piece into PAX 3 oven.
4. Turn PAX 3 on, and let heat for at least 30 seconds before
vaporizing. Recommended temp setting: 3 petals (400 degrees)
or 4 petals (420 degrees).
5. When finished, turn o PAX 3 and allow to cool for 2-3 minutes
before removing insert.
a. End piece
b. Chamber
c. O-ring (underside of chamber lid)
d. Chamber lid
a
b
d
c
To Next Page
Loading...
