PAX D135 User Manual (English)

To Next Page

D135 Secure Card Reader

1. Instructions

1) Power ON/OFF

Power on: Press button for 3 seconds until ‘Di’ is heard, and then power indicator light is

lighted.

Power off: Press button for 3 seconds until four status indicator light is lighted and then off,

then the POS terminal is being turned off.

2) IC Card

Put IC card chip side upward, push-in IC card slot and to bottom.

3) Contactless Card

The card read area is above the EMV Contactless symbol.

4) Battery Charge display

Connecting USB port with external adapter can charge the battery. If the power indicator

light is flashing red slowly, it indicates that pos is charging. If the power indicator is steady

green, it indicates that pos is full charge.

2.Terminal Specifications

Processor Cortex M3, 96MHz

Memory Space 1MB in-chip Flash and 4MB Out-of-chip Flash,128KB SRAM

Keyboard one ON/OFF/Download key.

IC Card Reader Conform to ISO7816, EMV L1&L2 and PBOC3.0 standard

Magnetic card Conform to ISO7811, ISO7812 standard

Contactless Card Conform to ISO14443 TypeA & TypeB;Mifare ® standard

Communication Mode BT

Interface 1 Type-C USB (Device)

Audio Buzzer

Power supply 5V/500mA

Working Condition Working temperature: 0℃~50℃

Need help?

Do you have a question about the PAX D135 and is the answer not in the manual?

PAX D135 Specifications

General

Battery Life	Up to 8 hours
Display	3.5-inch color touchscreen
Security	PCI PTS 5.x approved
Connectivity	Wi-Fi, Bluetooth
Battery	lithium-ion battery
Operating System	Android
Certifications	PCI PTS 5.x
Ports	USB Type-C
Device Type	Mobile POS
Supported Cards	EMV chip, magnetic stripe, contactless (NFC)