PAX PAX2 User Manual

USER’S GUIDE
IN THE BOX
Included in the box are:
• The PAX 2
• Two silicone mouthpieces—a flat one, flush with the top of the
device, and one raised option
• One magnetic charging cradle with USB cord
• PAX 2 cleaning kit with isopropyl alcohol & pipe cleaners
CHARGING
Before using PAX 2 you’ll need to make sure it’s charged.
Connect the cradle and cord provided to your computer or outlet
adaptor, then place PAX 2 on the cradle to charge.
Once PAX 2 is on the cradle, watch for the pulsing white petals.
The more petals lit, the more charge PAX 2 has:
PAX 2 is fully charged when all four petals stop pulsing and turn solid.
0–25% 25–50% 50–75% 75–100%

PAX PAX2 Specifications

General

Brand	PAX
Model	PAX2
Category	Battery Pack
Language	English

Summary

Charging Your PAX 2

Charging Status Indicators

PAX 2 petals indicate charge level: one petal for 0-25%, two for 25-50%, three for 50-75%, four for 75-100%. Fully charged when solid.

Getting Started with PAX 2

Packing the Oven

Powering On and Using PAX 2

Device Activation and Heating

Press the mouthpiece center briefly to turn on. Device heats in 30-60 seconds, indicated by pulsing purple LEDs.

Drawing Technique and Session

Temperature Settings

Adjusting Temperature Levels

Hold mouthpiece button for extended press. LEDs change color (green to red) to indicate temp. Cycle settings via mouthpiece press.

Cleaning and Maintenance

Cleaning Procedure

Use pipe cleaner with isopropyl alcohol for vapor path and screen. Soak mouthpiece and screen, but not lid.

Drying and Reassembly

Cooling and Sensing Features

Automatic Oven Cooling

Lip Sensing and Auto Shut-off

Checking Battery Charge

Battery Level Indicator