PAX SK800 - Page 7

3
M6-50
Expansion Screw
6
4
M4-12
Combination Screw
2
 Installation Steps
1. Use 6pcs expansion screws to fix the bracket on the wall.
• Use an 8.0 mm diameter drill bit to drill holes in the wall according to the position of the
bracket fixing hole. The size is shown in the figurebelow:
• Note: Hole diameter is 8.0mm, Hole depth is above 60.0mm.
2.Use the 4pcs hooks on the back of the device to hang the whole device on the wall bracket.