PAX T3180 - Troubles Occur During Printing

T3180 User Manual
23
6.3 Troubles Occur During Printing
Problem Description
Probable Reason
Solution
Coloured stripe in the
paper
Paper near end
Reinstall the roll paper
Blurred printing or spot
Incorrect roll paper installation
Check if the roll paper is installed
Unqualified roll paper
Use
paper
recommended
thermal
roll
Dirty thermal head or print
roller
Clean the thermal head or print
roller
Low print density
Increase the print density level
Paper Jam
Paper strike
Open the printer cover, check the
paper path and remove jammed
paper
Vertical
missing
print
words
Dirty thermal head or print
roller
Clean the thermal head or print
roller
Thermal head damaged
Contact your dealer for assistance
NOTE: The density of setting, please refer to "Utility Tool Manual"