Paxar Monarch 9800 Series

Questions and Answers

R
richard93Aug 17, 2025
Why is my Paxar Monarch 9800 printing shadows or smears?
- A
  Amanda HenryAug 17, 2025
  If your Paxar Printer is printing shadows or smears, you can try cleaning the printhead, changing the supply, and checking the ribbon.
R
Ronald LopezAug 20, 2025
Why is my Paxar Monarch 9800 printing so lightly?
- G
  gdelacruzAug 20, 2025
  If your Paxar Printer is producing light prints, try changing the supply, adjusting the print contrast, checking the wide/narrow knobs, and inspecting the ribbon.
G
garyortegaAug 22, 2025
What to do if my Paxar Monarch 9800 Printer has voids in printing?
- M
  Miranda BoltonAug 22, 2025
  If your Paxar Printer is showing voids in printing, try cleaning the printhead, changing the supply type, and checking the ribbon.
M
Michelle VelazquezAug 26, 2025
Why is my Paxar Monarch 9800 printing too dark?
- P
  Paul McconnellAug 26, 2025
  If your Paxar Printer is printing heavily, you should clean the printhead, change the supply, adjust the print contrast, check the wide/narrow knobs, and check the ribbon.
R
Robert NguyenAug 28, 2025
What to do if backing paper is wrapped around platen or peel roller of Paxar Monarch 9800 Printer?
- J
  jessicalloydAug 28, 2025
  If the backing paper is wrapped around the platen or peel roller of your Paxar Printer, carefully remove the backing paper. When using backfeed and peel mode, ensure the backing paper tears at the saw-toothed tear edge.
M
Megan ChurchAug 30, 2025
How to fix serial bar codes that do not scan on Paxar Monarch 9800 Printer?
- A
  amanda84Aug 31, 2025
  If your Paxar Printer's serial bar codes do not scan, leave the printhead unlatched when not in use. Also, use a print speed of 2.5 IPS and adjust the print contrast.
R
Ricky DavisSep 2, 2025
What to do if Paxar Monarch 9800 does not print?
- F
  Felicia MillerSep 3, 2025
  If your Paxar Printer does not print, check the supply and ribbon. Also, send a corrected format and batch packet.
D
David HoltSep 5, 2025
How to fix blank labels or 750 series errors on Paxar Printer?
- M
  Monique VelezSep 5, 2025
  If you are getting blank labels or 750 series errors on your Paxar Printer, you should clean the supply sensors.
S
Sergio TorresSep 8, 2025
What to do if Paxar Monarch 9800 shows error message during startup?
- N
  Nicole RogersSep 8, 2025
  If you see an error message during the startup of your Paxar Printer, turn it off, wait fifteen seconds, and then turn it back on. If the error message reappears, call Technical Support.
B
Brian JonesSep 12, 2025
How to fix Paxar Printer that does not feed?
- T
  Tammy CookSep 12, 2025
  To resolve the issue of your Paxar Printer not feeding, ensure that the wide/narrow knobs are set correctly.