Paxton NET2 ENTRY-MONITOR - User Manual

Page 1
05/11/2012
Ins-30202 Net2 Entry - Monitor
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 support@paxton.co.uk
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
The Net2 Entry monitor is an audio/video monitor used to remotely communicate with visitors. It is powered using
power over Ethernet (PoE) and communicates with the other elements of the system using IPv6, providing 'plug
and play' installation. The only conguration required is the allocation of a monitor ID which the system uses to
identify the correct monitor.
If used in conjunction with Net2 access control software, this must be version 4.25 or later.
Description of product
2
3
4
5
1
6
1. Colour 3.5' Touch screen
2. Volume control
3. Speaker
4. Open door button
5. Microphone
6. Handset

Paxton NET2 ENTRY-MONITOR Specifications

General

Technology	IP
Connectivity	Ethernet
Product Type	Intercom Monitor
Camera	No
Audio	Yes
Power Supply	PoE (Power over Ethernet)
Power Supply Voltage	12V DC
Operating Temperature	0°C to +40°C
Compatibility	Net2 Entry system
Connection Type	RJ45
IP Rating	N/A (Indoor use only)

Summary

Installation

Configuration

Setting the Monitor ID

Procedure for assigning a unique number to identify the monitor for visitor calls.

Operation - Answering a call

Operation - Viewing a camera

Operation - Do not disturb mode