Adding the card pack
1. Take the enrolment card from the box of cards.
2. Present the enrolment card to the reader.
3. The reader beeps and the LED's light up as the enrolment card is acknowledged.
4. Return the enrolment card to the box. All the included user keyfobs are now valid.
Programming the system
Adding user cards
1. Each user keyfob has a corresponding shadow card.
2. Write the name of the user on the shadow card.
3. Issue the keyfob to the user.
4. Return the shadow card to the card box and keep in a safe place.
Barring user cards
1. If a user has lost their keyfob, it can easily be removed from the system.
2. Take the matching shadow card from the card box.
3. Present the shadow card to the reader and return to the card box.
4. If the user tries to use their keyfob, they will no longer be granted entry.
1 2 3 4
PROXIMITY
enrolment card
1. At installation, present this
card to the reader to validate
the tokens in this pack.
2. To re-validate a user token,
present this enrolment card
to the reader followed by the
user token.
BEEP!
BEEP!
1 2 3 4
1. At installation, present this card to the
reader to validate the tokens in this pack
2. To re-validate a user token present this
enrolment card to the reader followed
by the
user token
FUNCTION CARD
enrolment card
1. At installation, present this card to the
reader to validate the tokens in this pack
2. To re-validate a user token present this
enrolment card to the reader followed
by the
user token
FUNCTION CARD
enrolment card
1. At installation, present this card to the
reader to validate the tokens in this pack
2. To re-validate a user token present this
enrolment card to the reader followed
by the
user token
FUNCTION CARD
enrolment card
1. At installation, present this card to the
reader to validate the tokens in this pack
2. To re-validate a user token present this
enrolment card to the reader followed
by the
user token
FUNCTION CARD
enrolment card
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
Swipe this card to bar:
Write name:
John Smith
1 2 3 4
User keyfob
Shadow cards