PB TEEN Sleep & Study Loft Bed User Manual

www.pbteen.com
Sleep/Study Loft Bed
WARNING: Failure to follow these warnings and assembly instructions could
result in serious injury or death. To help prevent serious or fatal injuries from entrapment or
falls: .
• Read all instructions before assembling bunk bed.
• Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use bunk bed if any parts are missing or broken.
• DO NOT substitute parts. Contact PBteen for replacement parts and instructional literature if needed.
• Follow the information on the warnings appearing on the upper bunk end structure and on the carton. DO NOT
REMOVE WARNING LABEL FROM BED.
• Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of
entrapment or falls.
• Ensure thickness of mattress does not exceed 9 inch and the surface of mattress must be at least 5 inch
(127mm) below the upper edge of guardrails.
• Use only mattress which is 74”-75” long and 52.5”- 53.5” wide on upper bunk.
• Do not allow children under 6 years of age to use the upper bunk.
• Periodically check and ensure that the guardrail, ladder and other components are in their proper position, free
from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and prohibit jumping on the bed.
• Prohibit more than one person on the upper bunk.
• Always use the ladder for entering and leaving the upper bunk.
• Use of a night light may provide added safety precautions for a child using the upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the
guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall.
• The use of water or sleep flotation mattresses is prohibited.
• If refinishing, use a non-toxic finish specified for children’s products.
STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
04-000066-3

PB TEEN Sleep & Study Loft Bed Specifications

General

Brand	PB TEEN
Model	Sleep & Study Loft Bed
Category	Indoor Furnishing
Language	English

Summary

Pre-Assembly Instructions

Parts and Hardware Identification

Tools Required for Assembly

Lists tools necessary for assembly but not included with the product.

Hardware List

Details all the hardware components provided with the bunk bed kit.

Assembly Steps

Assemble Bookcase Panels

Guides assembly of bookcase left, right, and center shelf panels.

Attach Headboard Components

Details attaching headboard center panel, bottom rail, and connecting to bookcase.

Assemble Footboard Structure

Guides assembly of the footboard posts and bottom panel.

Attach Front Rail

Connects the front side rail to the headboard and footboard.

Attach Back Rails

Secures the back side rail and back bottom rail to the structure.

Install Guard Rails

Attaches the front and back guard rails to the bed frame.

Attach Metal Support Rails

Installs metal support rails for the bed slats.

Assemble Desk Unit Sides

Guides assembly of the desk's side panels and bottom.

Complete Desk Unit Assembly

Finalizes the desk structure by attaching top and front/back rails.

Install Adjustable Shelf

Places the adjustable shelf using shelf supports.

Attach Desk Top

Secures the desk top to the main structure.

Secure Desk Top with Brackets

Attaches L brackets to reinforce the desk top connection.

Install Drawer and Knob

Mounts the pencil box drawer and its knob.

Attach Ladder

Secures the ladder to the front side rail.

Install Slat Roll

Lays out and secures the bed slats using support rails and brackets.

Final Adjustments and Care

Leveling the Furniture

Instructions for ensuring the furniture sits level and stable.

Care Instructions

Guidance on cleaning and maintaining the furniture.