Getting Started
Charging the Speaker
Plug the small connector of the included charging cable into the charging port on
the back of the speaker. Plug the large connector into a USB power source, such
as a 5V/1A USB adapter (not included).
The charging LED indicator will turn RED while charging and turn OFF when fully
charged. When the speaker is low on power, a tone will be heard indicating that
it needs to be recharged.
Powering ON/OFF
• Press + hold the Power button to power ON and OFF.
• When powered ON, the speaker will automatically enter
Bluetooth pairing mode, and may automatically re-pair to a
previously-paired device nearby.
Bluetooth Pairing
1. Power the speaker ON, and switch to Bluetooth input mode. The LED indicator
will quickly flash BLUE.
2. Set your mobile device to search for Bluetooth devices. When the list appears,
select PBSK205 from the found devices.
3. After a successful pairing, a tone will be heard and the LED indicator will slowly
flash BLUE.
Adjusting Volume
Volume can be adjusted with the buttons on the top of the speaker or with the
controls on your paired device.
• Press the + button to increase volume.
• Press the — button to decrease volume.
Press +
Hold
To Next Page
Loading...