EasyManua.ls Logo

PC-Pen T20 - Installation and Software Usage; Quick Installation Guide; Applying Handwriting Software

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shenzhen pc-pen Co.,Ltd
TEL+86-755-83995718 FAX+86-755-83995708 http://www.pc-pen.com
5
pen, please don’t let it over slope and down the rolling
key.(see pictures)
3. Applying the functions, please following two kinds of
operation modes:
A. Press pen’s rolling key to realize double clicks
function.
B. Double click nib of pen
Quick install
1. Connect the pen seat to PC’s or notebook’s USB interface.
2. Put the CD into CD DRIVER and let it moves automatically SETUP
and complete the installment.
3. Turn “ON” the source electricity of PC-PEN, if you don’t
need it; please adjust the button to “OFF”.
4. The first time you use it, please insert the pen into pen seat
to recharge. The red light shows the volume of power, the green
light shows the power full.
Caution: We adopt the built-in lithium polymer battery,
the first time you use it, please put the pen into pen
seat above three hours until the light become green.
Apply to use handwrite software