TM
© 2014 FLIR Systems, Inc. All rights reserved.
TM
USER MANUAL
User Manual. / 11
Document #: 435-0001-01-10
Configure additional features on
the FLIR ONE™.
SETTINGS MENU
When the Spot Meter is enabled, the temperature displayed
is affected by many factors, including a property of the target
material known as emissivity. This property is a relative rating
of how well a material emits or radiates thermal energy.
Some materials are more emissive than others; reflective
materials like metals tend to be poor emitters. For most
materials, the default “matte” setting is a fair approximation.
If a GPS signal is available, the location will be added to cap-
tured images. This makes it possible to see images on a map.
Turn this on to save a copy of your images and videos in the
iPhone photo gallery. Images will always be stored in the FLIR
ONE camera regardless of this setting. Items already captured
will not be copied.
EMISSIVITY
SAVE GPS LOCATION
SAVE TO CAMERA ROLL
Use this setting to change the temperature unit of measure
between the Fahrenheit and Celsius scale.
TEMPERATURE UNIT
Settings Menu. /
To Next Page
Loading...
Need help?
General