Manual
3
1 Introduction
Thank you for purchasing a PCE-MRS 100 from PCE Instruments.
The laboratory stirrer is ideal for fluids, consisting of various components to mix with different rotation
speeds, and guarantees great results. The laboratory stirrer allows you to whisk liquids in open rather
than in closed containers. Thus, for example with the laboratory stirrer you can work with substances that
require segregation of the environment. The simple geometry of the floating stirrer of the laboratory stirrer
PCE-MSR 100 also considerably facilitates rinsing and cleaning. To get the small magnets out of the
stirring containers, one uses a long, plastic coated magnetic bar.
2 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used in approved temperature range
- The opening of the case should only be done by qualified personnel of the PCE Instruments.
- The instrument should never be placed with the user interface (e.g. keyboard side on a table)
- You should not make technical changes on the device
- The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner
This user's handbook is published from PCE Instruments without any guarantee.
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
To Next Page
Loading...
Need help?
General
Weight and Dimensions