Need help?Do you have a question about the PCS 15 and is the answer not in the manual?
Details the built-in power management system for switching the monitor into a low-power mode.
Instructions for connecting the monitor's power cord and signal cable to the computer.
Provides a list of common symptoms and their corresponding solutions or checks for the monitor.
Outlines the steps to perform a self-test to check if the monitor is functioning properly.
Information on installing the monitor on Plug & Play compatible systems and driver installation.
Illustrates the step-by-step process for attaching the monitor stand.
Details the functions of the monitor's control buttons (Exit, Adjust, Menu).
Provides tips for receiving visual signals and judging the monitor's working condition.
Instructions for adjusting the monitor's brightness and contrast via the OSD menu.
Guidance on adjusting horizontal and vertical Moire patterns to eliminate visual artifacts.
Explains how the Degauss feature removes color impurities caused by magnetic fields.
Instructions on using the recall feature to reset monitor settings to their original levels.
Details on adjusting color temperature (warmth) and specific color settings (Red, Green, Blue).
Information on sRGB mode, including color temperature, brightness, and contrast limitations.
Instructions for adjusting the horizontal and vertical position of the monitor's entire display.
Guidance on adjusting pincushion and trapezoid settings for display distortion.
Instructions for adjusting the parallelogram distortion by correcting the display's left or right leaning.
Discusses environmental factors influencing monitor performance, like speakers and electronic devices.
General