3
INTRODUCTION
Thank you for choosing the PCWI Wet Sponge Porosity
Detector for low voltage testing of coatings for the
presence of pinholes. Two models are available: a
selectable 9, 67.5 & 90 volt; and a fixed 67.5 volt unit.
PCWI have designed this instrument with care, to
provide ongoing efficiency under comprehensive
testing. Under reasonable care in operation, the unit
will provide many years of trouble free detection.
To complement these units, PCWI maintains a
comprehensive range of test analysis and Measuring
Instruments for the coatings industry as well as
providing appropriate Certifications.
PCWI, in a continuing desire to achieve the maximum
in corrosion detection competence, welcomes user
enquiries and recommendations.
Yours sincerely
Paul Van Gaal
To Next Page
Loading...
