PDC spas Owner's Manual - ProView Control Navigation; Spa Status and Navigation; Equipment Access and Programming

Operaon Systems, Premium Series | ProView™ Control
47
Main Funcons
Spa Status
Important informaon about spa operaon can be seen quickly from
the Main Screen.
The most important features, including Set Temperature adjustment,
can be accessed from this screen.
The actual water temperature can be seen in large text and the desired,
or Set Temperature, can be selected and adjusted. Time-of-day, Ozone
operaon and Filter Operaon status is available, along with other
messages and alerts. High Temperature Range vs. Low Temperature
Range is indicated in the upper right corner.
A Lock icon is visible if the panel or sengs are locked.
Navigaon
Navigang the enre menu structure is done with the 5 buons on the control panel.
The right navigaon arrow on the screen indicates a menu. Press the
right navigaon buon to enter the menu. A selecon box will then
appear in the center of the screen. Press the le or right navigaon
buon to view different choices. Press the center Select buon once
on the desired choice.
Messages: At the boom of the screen, messages may appear at various
mes. Some messages must be dismissed by the user.
All Equipment Access: The Spa Screen shows all available equipment to control. The display shows icons that are related to the
equipment installed on a parcular spa model, so this screen may change depending on the installaon.
The navigaon buons are used to select an individual device. The device that is chosen will have a box around it and will be shown
at the top of the screen. Once a device is selected, it can be controlled using the center Select Buon.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the state that the equipment is in.
Programming, Etc.
The Sengs Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range, Heat Mode, and Invert Panel.
When one of these items is highlighted, the Select Buon is used to toggle between two sengs.
All other menu items (with an arrow poinng to the right) go to another level in the menu.