PDC spas Owner's Manual - Accent Control Operation; Navigation and Control Panel; Sample Navigation Flow

Operang System, LifeStyle Series | Accent™ Control
53
Warning: Read all instrucons before using the spa. PDC Spas, PDC Internaonal assumes no responsibility for personal injury
or property damage sustained by or through the use of this product. When installing and using this equipment, basic safety
precauons should always be taken to reduce risk of electrical shock, ensure safe usage, and safeguard the user’s health.
Navigaon
Navigang the enre menu structure is done with 2 or 3 buons on the control panel.
The Accent control panel has separate WARM (Up) and COOL (Down) temperature buons.
The MENU Buon is used to choose the various menus and navigate each secon.
The two Temperature buons (Warm and Cool) are used to select and change the parameter.
Typical use of the Temperature buons allows changing the Set Temperature while the numbers are flashing in the LCD.
The menus can be exited by pressing the Menu key repeatedly to return to main screen.
Waing a few seconds in the Main Menu will allow the display to revert to the Main Screen. Most changes are not saved unless
Menu key is pressed.
Sample Navigaon Flow
Power-up Screens
Each me the System powers up, a series of numbers is displayed.
Aer the startup sequence of numbers, the system will enter Priming Mode.