How to fix PDi PDI-A24A LED TV remote not working?
If the remote for your PDi LED TV isn't working, first check the batteries. If that doesn't solve the problem, ensure the Bed A, B, C, D setup is correct.
Why is there picture but no sound on my PDi PDI-A24A?
If your PDi LED TV shows a picture but has no sound, make sure the internal speaker is enabled and the sound isn't muted. Also, check that no headphones are plugged in. If you're using an external source, ensure it's properly connected.
What to do if there is no picture from external source on PDi PDI-A24A?
If you're not getting a picture from an external source on your PDi LED TV, first ensure the external source is connected properly. Also, check if the source is enabled in the Sources menu and that Parental Control isn't blocking it.
Why does my PDi LED TV change channels or turn off unexpectedly?
If your PDi LED TV channels change or the TV turns off unexpectedly, it might be due to fluorescent lighting interfering with the IR receiver. Try disabling the analog pillow speaker, relocating the TV away from the light source, or applying opaque tape over the IR sensor.
How to troubleshoot analog pillow speaker problems with PDi PDI-A24A LED TV?
If you're experiencing issues with the analog pillow speaker on your PDi LED TV, confirm it's securely plugged in. Connect the pillow speaker directly to the TV to rule out issues with the across-room or bedside wiring. Also, check whether fluorescent lighting is causing interference.
What to do if PDi Qube will not turn on PDi LED TV?
If your PDi Qube isn't turning on the TV, check that the standby power is set to normal.
Why does my PDi LED TV take a long time to turn on?
If your PDi LED TV takes a long time to turn on, check the standby power setting.
How to fix Pro:Idiom digital channels not showing up on PDi PDI-A24A?
To resolve Pro:Idiom digital channels not showing up on your PDi LED TV, check Setup > Channels > Pro:Idiom.
How to fix CCI/MTI not working on PDi PDI-A24A LED TV?
To solve CCI/MTI not working on your PDi LED TV, check Setup > Channels > Pro:Idiom.
How to make clone menu appear on PDi LED TV?
If the clone menu does not appear on your PDi LED TV, verify that the “USB Media” source is disabled in the Sources menu.
To Next Page
General