PDL Thermosafe 4HS1200WH

To Next Page

Installation Guide

PDL Thermosafe Ceiling Sweep Fans

4HS1200WH, 4HS1400WH, 4HS1200SS, 4HS1400SS, 4JH1200WH,

4JH1400WH, 4JH1200SS, 4JH1400SS

IMPORTANT NOTES

1. To ensure proper balance, the blades are a matched set. Do

not mix-up the blades with those from another fan.

2. Transport and transit handling may loosen factory fitted cables.

Please check and secure terminal screws before installation.

PM-119PDLA Rev0

Thank you for purchasing this PDL Thermosafe Ceiling Sweep Fan. You can be assured of years of trouble free operation by

installing your ceiling fan carefully according to these instructions. Please read all the instructions before commencing, then

complete each step in order from one to eight.

INCLUDED WITH YOUR FAN

A. Motor Assembly

B. 4 x Blades

C. 3-Speed Fan Controller

D. Screw Pack

E. Mounting Bracket

F. Instruction Sheet

Hangsure Bracket or J-Hook Bracket

PROTECTING THE FAN

Do not place the motor directly onto a flat surface.

The plastic nipple underneath the motor cannot support the weight

of the motor and may be easily damaged. When working on the

fan, place the motor on the foam packaging with the nipple located

in one of the recesses. This protects the nipple and the finish.

All electrical work must be carried

out by a qualified electrician.

CLEARANCES AND ANGLED CEILINGS

Hangsure Mounting

Suitable for pitched ceilings

with a maximum angle of 18.5˚.

CONTROLLING A SINGLE FAN

This fan has been supplied with a quality PDL 3 Speed Controller

that is designed to operate a single fan.

Need help?

Do you have a question about the PDL Thermosafe 4HS1200WH and is the answer not in the manual?

Summary

PDL Thermosafe Ceiling Sweep Fans Installation Guide

Included Components

Lists all parts included with the fan for installation.

Installation Clearances and Safety

Specifies clearance requirements, handling, and safety notes for installation.

Fan Control Options

Details on the supplied 3-speed controller and single fan operation.

Mounting and Blade Installation

Mounting the Fan Support Bracket

Instructions for securely mounting the fan bracket to the ceiling structure.

Fitting the Blades

Steps for attaching the fan blades to the motor assembly.

Connecting the Light Fitting

Procedure for connecting an optional light fitting to the fan.

Hanging the Fan

Details on how to hang the fan using either Hangsure or J-Hook brackets.

Fan Wiring and Operation

Connecting the Fan Wiring

Wiring instructions for connecting the fan motor and optional light.

Speed Controller Installation

Steps for installing and wiring the 3-speed flush fitting capacitor controller.

Reversible Switch Operation

Instructions to check and set the fan's forward/reversible switch.

Cleaning and Maintenance

Recommendations for cleaning the fan safely.

Troubleshooting and Warranty

Troubleshooting Common Issues

Common issues and solutions for fan operation problems.

Product Warranty Details

Details on product warranty, conditions, and claims process.