Need help?Do you have a question about the PDMOVIE LIVE AIR 3 SMART and is the answer not in the manual?
General| Wireless Range | 328' / 100 m |
|---|---|
| Power Source | Rechargeable Battery |
| Mounting | 15mm rod clamp |
| Charging Time | 3 hours |
| Dimensions | 110 x 52 x 34 mm |
| Operating Temperature | -4 to 131°F / -20 to 55°C |
| Storage Temperature | -20 to 60°C |
Install the motor onto the camera rig and ensure proper gear meshing.
Turn on the controller and motor, and establish Bluetooth connection.
Perform manual or automatic calibration for the motor and lens stroke.
Configure the autofocus system, including distance references.
Learn to switch between automatic and manual focus control modes.
How to charge the controller and motor batteries using USB.
Steps for replacing the controller's battery.
Install the Bluetooth controller into the REMOTE AIR RIG.
Detach the Bluetooth controller from the REMOTE AIR RIG.
Instructions on how to download the REMOTE AIR APP.
Steps to connect the app to the motor.
To Next Page
