Need help?Do you have a question about the PDMOVIE Live Air 2 and is the answer not in the manual?
General| Brand | PDMOVIE |
|---|---|
| Model | Live Air 2 |
| Category | Camera Accessories |
| Language | English |
Install the motor on the 15mm rod and ensure the motor gear matches the lens gear. Use camera hot shoe clamp for DSLR lenses.
Press the ON/OFF button for three seconds until the indicator light powers on. Motor turns on automatically when battery is inserted.
Indicator lights flash quickly for 60 seconds during search. Controller light stays on upon successful connection.
Press ON/OFF once, then hold until motor rotates. Press and hold motor button for three seconds until motor rotates.
Connect gears, turn lens to start/end points, then center. Recommended for DSLR camera lenses.
Use provided charger to activate battery. Insert battery into corresponding slot to start charging.
Download app, turn on motor, initiate phone Bluetooth, then turn on APP for automatic connection.
Ensure handle is off, press ON/OFF and FOCUS buttons, then hold ON/OFF to refresh Bluetooth.
Insert battery to start motor. Successful connection indicated by controller screen Bluetooth logo and green handle status light.
Find app info via website/social media. PDL-TC-AF controller runs 8-10 hours, charges in 20-25 mins. Control distance is 32 feet.
Press CALIBRATION/RESET for emergency stop. Adjust motor speed (slow, medium, fast) by clicking ON/OFF button five times.
Check controller light for calibration issues. White blinking light means A-B point set; press ON/OFF to cancel.
Check battery monthly. Avoid low power for long periods and overcharging to preserve battery capacity. Keep charge at 50-74%.
To Next Page
