SCOLLEGARE I TELECOMANDI
BLUETOOTH:
1) Andare su Impostazioni > Dispositivi > Dispositivi
Bluetooth®.
2) Selezionare l’altro telecomando dall’elenco e
scegliere l’opzione “Disconnetti”
3) Utilizzando il controller PS4®, selezionare nuovamente
l’altro telecomando dall’elenco dei dispositivi.
4) Premere Opzioni con il controller PS4®.
5) Selezionare “Dimentica dispositivo”.
6) Confermare la selezione “OK”.
7) Riavviare la console.
8) Rimuovere le batterie del nuovo telecomando e
inserirle nuovamente.
Please continue with the following steps below to
pair the Cloud Remote, after you have unpaired the
other remote from your console.
Check the PS4™ system software version
To use the Cloud Remote, the PS4
™
system
software must be version 3.0 or later. You can
check the system software version by selecting
Settings -> System -> System Information.
Pairing the Cloud Remote with a PS4™ system
This operation is performed only once, when you
are using the Cloud Remote for the rst time.
1. Turn on the PS4
™
system.
2. Using a connected controller, select
Settings -> Devices -> Bluetooth Devices
from the PS4
™
system menu.
3. Press the PS button once to activate
the remote.
4. Next, press and hold the SHARE button and
the PS button simultaneously until the red LED
begins to ash.
OPERATING THE PS4™ SYSTEM
L1 R1
L2 R2
PS Button
Share
Button
(Not visible
when unlit)
LED
To Next Page
Loading...
Need help?
General
