2. Connecting the RIFFMASTER Wireless Guitar Controller
To connect your wireless guitar controller to your console follow the below steps:
a) Plug the included Wireless USB Dongle into your PS5® or PS4™ console. The LED on the dongle will begin flashing slowly.
i. NOTE: PDP recommends inserting the USB Dongle into the front USB port of PS5® consoles (CFI-1000 series).
b) Press and release the PS Button on the front of the RIFFMASTER Guitar.
c) Once the guitar is connected to the dongle, the white status LED on the guitar and LED on the dongle will be solid
illuminated.
d) To turn off the guitar, press and hold the PlayStation button on the guitar for 6 seconds until the white status LED turns
off.
i. Note: If the guitar becomes unresponsive and cannot be powered off normally, press and hold the PlayStation
button for 12 seconds to force a hard reset.
Note: The RIFFMASTER wireless guitar controller uses 2.4GHz radio frequency range. When the PS5® console or other products use the same
radio frequency range, it may give negative influence mutually.
PDP validated operability between PS5® consoles (CFI-1000 series) and this guitar controller.
3. Selecting your preferred platform
The RIFFMASTER Wireless Guitar is compatible with PS5® consoles and PS4™ consoles. When selecting your desired console,
use the 2-position slide switch on the bottom of the guitar (next to the USB-C charging port). Select “PS5” OR “PS4” mode to
align with your console.
FEATURES
1. Audio Settings
The RIFFMASTER Wireless Guitar Controller has a 3.5mm audio jack on the bottom to connect a wired headset for audio output
and microphone input.
a) To adjust the game volume, hold down the “Function” button and press Up/Down on the D-Pad.
b) To mute your microphone, press the “Function” button twice; the LED will illuminate amber color when muted.
To Next Page
Loading...
Need help?
General
