English
IN THIS QUICK START GUIDE
• Items included with the RIFFMASTER Wireless Guitar Controller
• Getting Started
o Assembling the Guitar
o Connecting the Guitar
o Choosing your Platform
• Features
o Audio Settings
o Programmable Button
o Battery Charging
ITEMS INCLUDED
• A: RIFFMASTER Wireless Guitar Controller
• B: Shoulder Strap
• C: USB Wireless Dongle
• D: 1.2m USB-C Charging Cable
• E: QR Code insert
GETTING STARTED
1. Assembling the Guitar
To assemble the RIFFMASTER Wireless Guitar controller follow the below steps:
a) Unfold the neck of the guitar away from the body of the guitar until it is fully extended.
b) Push the locking tab down on the back of the guitar neck to lock it in place.
c) Align the headstock with the top of the guitar neck and push down to snap it in place.
d) The guitar comes ready to play for right-handed guitarists. To convert to left-handed, unscrew the top peg and screw it
in on the opposite side.
a. Note: You will also need to change to left-handed mode in the game software.
e) Attach the included adjustable shoulder strap to the top and bottom pegs of the guitar.
f) The RIFFMASTER Pick Guard, on the front of the guitar, can be removed by inserting your fingers into the finger-well and
pulling up. Once removed, you can place your Wireless USB Dongle in the designated storage area for safe keeping when
not in use.
To Next Page
Loading...
Need help?
General
