or accidents.
Do not use in conjunction with tyre foam - lling products.
The monitor does not require constant observation. When there is
abnormal tyre pressure or temperature, the display will automatically
alarm with both a visual and audio cue.
Ensure that the in car display does not distract while driving
This manual covers internal and external sensors.
* Don’t beat the sensor.
* The system can send light and voice alarm when tire pressure and
temperature not normal.
TPMS Work Introduce
The system consists of four sensors and a receiver , sensor directly replace
the original car valve installation. Sensor timing measurement tire
pressure and temperature information, the receiver timing transmitting a tire
in the latest information to the owners of the phone, in the driving
process and the proper pressure, time interval transmission signal sensor is
larger than the headway time process and abnormal pressure, when the
sensor detects a tire in a certain period of time, immediately sent the latest
information to the receiver, the receiver receives the
leakage information, immediately notify the owners of gas leakage
alarm phone.
TPMS receiver introduce
1
、
The receiver get the sensor signal and send to phone
；
2
、
Voltage is 5V or cigarette lighter provide power
；
3
、
The receiver communication as the Bluetooth as the main agreement
，
the
name of Bluetooth receive is “TPMS”.
4
、
TPMS base function
，
as the data show
，
low pressure, high pressure, high
temperature alarm.ID setting, and some valve setting, need the phone done.
5
、
The green led will be light when the Bluetooth is connected.
Sensor ID setting
1.Before shipping, sensor ID and position have set in receiver, you can install
as the sensor position, no need setting
；
2.When sensor need replacement, need use master operate position tire ID
study or ID learning manual, then receiver get into ID learning status. then let
To Next Page
Loading...
