Installation Guide
Tools & materials required for each application
• Mitre saw with a non-ferrous
metal cutting blade
• Drill
• Phillips #2 bit
• Phillips #2 screwdriver
• Slot-head screwdriver
• Level
• Socket or wrench set
• Measuring tape
• Pencil
Concrete anchor
Concrete screw
Hard Surfaces
Soft Surfaces
• Post hole digger
• Shovel
• Concrete mixing
equipment
• Concrete trowel
• Dry premixed concrete (per post):
Fasteners included with each fence component
LED Application
• Drill bits for metal:
1/4", 1/2", 5/8“
• Hole saw for metal: 1"
• Small round metal file
• Scissors
All Applications
Rail & Picket Kit Rail Kit for Glass Panel
Hard Surface Post Yard Gate
Climate with frost heave - 200 lb.*
Climate without frost heave - 100 lb.*
*Quantities are estimated. Always check your
local codes for post hole size and depth.
• Hammer drill
• Masonry bits:
7/32", 5/16"
• Hammer
5/8" Self-drilling screw 5/8" Self-drilling screw
3/4" Self-drilling screw
Connector bolt
1" Self-drilling screw
Hinge bolt
Pool Gate
1" Self-drilling screw
5/8" Self-tapping screw
Canadian VersionCanadian Version
To Next Page
Need help?
General
