Electrical Connection
Connect the air compressor into an appropriate electricity supply, between either 110VAC
or 230VAC. Refer to the air compressor serial plate for input specification and ensure
your supply matches the requirements.
If the appropriate power cord is not supplied; a new CSA, UL approved power cord,
rated to at least 10 amps, can be fitted by a qualified electrician.
This unit is classified as SAFETY CLASS 1. THIS UNIT MUST BE
EARTHED. Before connecting the unit to the mains supply, please
check the information on the serial plate. The mains supply must be of
the stated AC voltage and frequency.
EARTH/GROUND (E):- Green & Yellow or Green
LIVE (L):- Brown or Black
Neutral (N):- Blue or White
Electrical requirements are nominal +/- 10% depending on chosen model. Extended
periods at extremes can have a detrimental effect on the operation and life of the Air
Compressor.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment maybe impaired.
To Next Page
Loading...