Need help?Do you have a question about the Peak PKC02MB and is the answer not in the manual?
General| Brand | Peak |
|---|---|
| Model | PKC02MB |
| Category | Flashlight |
| Language | English |
A standard two-prong 110/120-volt AC adapter is located on the back of the Spotlight.
Only use the charging adapter that is built in to this Spotlight. Use of any other chargers or adapters may void any warranty.
Connect the 110/120-volt AC charging adapter to an approved outlet for charging.
Recharge the Spotlight as soon as possible once the Spotlight starts to dim and after each use.
The Spotlight will function up to 25 minutes on a full charge.
The Spotlight will not illuminate while it is being charged due to circuit design.
No, the light bulb and battery are not designed to be interchanged or replaced.
The Spotlight can be charged by plugging an extension cord into the internal AC charger.
Typical charging periods are between 18 and 20 hours; do not charge for more than 24 hours.
Each click of the trigger switch activates or deactivates the halogen bulb or the LED work light.
To Next Page
